7.2
TRANSMIT
Note
The TRANSMIT transformation described below requires that unique names are assigned to
machine axes, channel and geometry axes when the transformation is active.
See
MD10000 $MN_AXCONF_MACHAX_NAME_TAB,
MD20080 $MC_AXCONF_CHANAX_NAME_TAB,
MD20060 $MC_AXCONF_GEOAX_NAME_TAB.
Besides this, no unequivocal assignments exist.
Task specification
Complete machining, see diagram:
Figure 7-1
Legend:
CM: Rotary axis (Main spindle)
ASM: Work spindle (miller, drill)
X, Y, Z: Cartesian coordinate system for programming of face-end machining (origin at the
rotation center of the face)
ZM: Machine axis (linear)
XM: Machine axis (linear)
Extended Functions
Function Manual, 03/2009, 6FC5397-1BP10-4BA0
End face machining of turned part
Kinematic Transformation (M1)
TRANSMIT
509