GE AF-600 FP Operating Instructions Manual page 31

5.3.4 Configuration Properties (nci)
Variable function
Max. motor speed [%]
Min. motor speed [%]
Nom. motor speed [RPM]
Nom. motor frequency [Hz]
Min. ramp-up time [s]
Min. ramp-down time [s]
Heartbeat time [s]
A range of network configuration variables (SCPT's) is available for configuration of the frequency converter parameters. These parameters require setting only
once, usually following installation.
5
NB!
Please note that the settings written to configuration properties (nci's) will be stored in the non-volatile memory. Continuous writing to configuration properties
may damage the non-volatile memory.
5.4 Network Variable Description - VSD Profile - input
5.4.1 Frequency Converter Speed Setpoint
Variable name:
nviDrvSpeedStpt
This input variable provides start / stop control and a speed reference.
30
Variable name
nciMaxSpeed
nciMinSpeed
nciNmlSpeed
nciNmlFreq
nciRampUpTime
nciRampDownTime
nciSndHrtBt
SNVT type: State:
SNVT_switch 0 (False)
1 (True)
1 (True)
1 (True)
0xFF (default)
SNVT type Profile
SNVT_lev_percent VSD 6010
SNVT_lev_percent VSD 6010
SNVT_rpm VSD 6010
SNVT_freq_hz VSD 6010
SNVT_time_sec VSD 6010
SNVT_time_sec VSD 6010
SNVT_time_sec VSD 6010
Value: Command:
Any Stop
0 Running 0 %
1-200 Running 0.5 to 100 %
201-255 Running 100 %
Any AUTO (invalid, no action)
AF-600 FP LonWorks
AF-600 FP pa-
rameter
F-17
F-18
P-06
F-04
F-07
F-08
-