Interfaces; Interfaces At The Vdp; View On The Connector Panel; Description Of The Interface - Bosch Rexroth IndraControl VDP 16.1 Series Project Planning Manual

VDP 16.1, VDP 40.1 and VDP 60.1
7

Interfaces

7.1

Interfaces at the VDP

View on the Connector Panel

Description of the Interface

Des. on the Type of connection
housing
X13 24 VDC – Power supply (required when
using a Y-Repeater)
XUSB1 2 USB interfaces
XUSB2 2 USB interfaces
XIPC GIGASTAR interface (connection to IPC)
XPS2KB PS/2 keyboard connection
XPS2MS PS/2 mouse connection
XDPSLAVE PROFIBUS DP connection
Des. on the Switch type
housing
S3 BCD rotary switch for PROFIBUS DP slave station
address (1-99)
S4 BCD rotary switch for PROFIBUS DP slave station
address (1-99)
DOK-SUPPL*-VDP16/40/60-PR02-EN-P
X13 XUSB2 XUSB1
1
Fig. 7-1: Position of the interfaces
Interfaces
Type of connector
(integrated)
Weidmüller male connector
terminal, MSTB 1.5, 3-pin
USB female connector, 4-pin,
type A
USB female connector, 4-pin,
type A
D-Sub male connector, 25-pin
Mini-DIN PS/2 female connector,
6-pin
Mini-DIN PS/2 female connector,
6-pin
D-Sub female connector, 9-pin
Fig. 7-2: Interfaces at the VDP 16.1, VDP 40.1 and VDP 60.1
Rotary Switch
Fig. 7-3: Rotary switch
XIPC XPS2KB XPS2MS S4
Mating connector or cable
(from outside)
Weidmüller female connector
terminal, MSTB 1.5, 3-pin
USB male connector, 4-pin
USB male connector, 4-pin
D-Sub female connector, 25-pin
Mini-DIN PS/2 male connector,
6-pin
Mini-DIN PS/2 male connector,
6-pin
D-Sub male connector, 9-pin
Function
To set the tens digit of the station address
To set the ones digit of the station address
7-1
Interfaces
XDPSLAVE
S3
1
VDP_16_Anschlussfeld.FH9