Using The Free Eg; Free Eg Parameters - Yamaha AN1x Owner's Manual

Control synthesizer analog physical modeling
Hide thumbs Also See for AN1x:
Table of Contents

Advertisement

Using The Free EG

The Free EG is a special 4-track recorder for
recording real-time knob position movements,
one parameter per track. Subsequently, when
you play the voice, the data of the parameter
assigned to each track will automatically change
in accordance with the way you recorded it.
Track Common
Track
Trigger
LoopType
Length
Key Track
Track No
ASSIGN 1
ASSIGN 2
ASSIGN 5
ASSIGN 6

Free EG Parameters

There are three categories of Free EG parameters: (1)
Track Common, which includes settings that affect all four
tracks of data for recording and play; (2) Track, or settings
which determine the current Free EG track, the parameter
assigned to each track, and which Scene the Free EG will
play; and (3) Track Job, for recording a track (or all tracks)
and performing track copy operations. Following is a brief
description of parameters available in each category.
Track Common Parameters
Trigger: Determines how the track playback is
triggered, either by pressing a key on the AN1x's
keyboard after selecting a voice ("free"), a Note
On message from the keyboard or an external MIDI
device ("kbd"), or by a Note On message from
either the keyboard, an external device, the
Arpeggiator or Step Sequencer ("all").
VOICE
Track Job
Param
Scene Sw
Rec
Copy
Undo
FREE EG
Track 1
MIX/VCF
ASSIGN 3
ASSIGN 4
Track 2
SYNC/FM
Track 3
ASSIGN 7
ASSIGN 8
Track 4
The Free EG is extremely flexible. You can record each
parameter in separate track passes, or all tracks
simultaneously in one pass. You can specify the length of
time the Free EG will record or play back, either in
measures (up to eight bars, based on Tempo setting), or
"absolute" time (up to 16.0 seconds), as well as have the
Free EG loop in one of four ways as you hold the keys.
You can copy Free EG data from another track to the
current track, within the same voice as well as from
another voice. And since Free EG track data and settings
are voice parameters, they are stored as voice data when
you perform a Voice Store operation.
For information about the Free EG recording procedure, see page 84.
Parameter changes over time (bars or seconds)
Noise Level
Sync Pitch
VCF
Resonance
VCF
VCF Cutoff
Values relative to knob movements
Track Common
Trigger
LoopType
Length
For more information, see page 81.
47
VOICE
Track
Track Job
FREE EG
Key Track
Track No
Param
Scene Sw
Rec
Copy
Undo

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents