en-US | 3 8 | User Guide | TPA 300
Connect to Scan Tool Mode
IMPORTANT:
TPA 300 Connect to scan tool mode is used to register the TPMS sensors IDs into
the vehicle's ECU. To program and copy TPMS sensors, test RKE, save and read
recorded jobs, and setup the tool, use the TPA 300 in Standalone mode. For basic
checking of the TPMS sensors – without writing into the vehicle ECU – use the TPA
Standalone mode. See this user manual dedicated section to learn how to operate
this mode.
1
Bluetooth Pairing
Continue
Previous
The tool is ready to
activate the Bluetooth
Confirm
connection.
© Bosch Automotive Service Solutions Inc.
1699502721 | REV. A | MAY 2020