Measuring Tool Power Supply; Operation With Lithium-Ion Rechargeable Battery Pack (See Figure A) - Bosch Professional Wallscanner D-tect 200 C Original Instructions Manual

16 | English
to adjust to the ambient temperature before switching it on. The accuracy of the
measuring tool and the functionality of the display may be compromised if exposed to
extreme temperatures or variations in temperature.
Avoid hard knocks to the measuring tool or dropping it. After severe external influ-
u
ences and in the event of abnormalities in the functionality, you should have the
measuring tool checked by an authorised Bosch after-sales service agent.
Certain ambient conditions fundamentally impair the measuring results. These
u
include, e.g. the proximity of devices that generate strong electric, magnetic or
electromagnetic fields, moisture, metal building materials, foil-laminated insula-
tion materials or conductive wallpaper or tiles. Therefore, also refer to other in-
formation sources (e.g. construction plans) before drilling, sawing or routing into
walls, ceilings or floors.
Hold the measuring tool by the intended gripping surface (11) only, so as not to
u
influence the measurement.
Do not attach any stickers or labels to the sensor area (19) on the rear of the
u
measuring tool. Metal labels in particular will affect measuring results.
Do not wear gloves when taking measurements and make sure
that you are properly earthed. If you are not properly earthed, the
material identification of "live" wires may be impaired.
When taking measurements, avoid devices that emit strong elec-
tric, magnetic or electromagnetic fields. If possible, deactivate all
tools whose radiation could interfere with the measurement and
switch off the corresponding functions or tools.

Measuring Tool Power Supply

The measuring tool can be operated either with conventional non-rechargeable batteries
or with a Bosch lithium-ion battery.
Operation with lithium-ion rechargeable battery pack (see figure A)
Use only the chargers listed in the technical data. Only these chargers are matched
u
to the lithium-ion battery of your measuring tool.
Note: The use of batteries unsuitable for your measuring tool can lead to malfunctions or
damage to the measuring tool.
Note: The battery is supplied partially charged. To ensure full battery capacity, fully
charge the battery in the charger before using your tool for the first time.
1 609 92A 5L6 | (29.12.2020) Bosch Power Tools