Troubleshooting; Fault Causes And Rectification - Silvercrest WK 8 A2 Quick Start Manual

Troubleshooting

This section contains important information about fault identification
and rectification. Follow the instructions to avoid hazards and damage.
WARNING
Observe the following safety information to avoid hazards and
property damage:
► Repairs to electrical devices should only be carried out by
specialists trained by the manufacturer. Improper repairs can
cause considerable risks to users and damage to the device.
Fault causes and rectification
The following table will help to identify and rectify minor malfunctions:
Malfunction
The camera does
not work.
WK 8 A2
Possible cause
No batteries inserted.
The batteries are
exhausted.
Remedy
Insert 4 x 1.5 V AA/
Mignon/LR6 batteries
into the battery compart-
11
ment .
Replace the batteries.
If you are unsatisfied with
the service life of the bat-
teries, insert an additional
4 x 1.5 V AA/Mignon/
LR6 batteries in the bat-
tery compartment.
GB │ IE │ NI │
37 ■