Silvercrest WK 8 A2 Quick Start Manual page 33

Note when setting up the camera that you need at least five photos to
create a video. The recording time set in the menu „Target recording
time" also applies to the time lapse recording.
After you confirm „Normal" or „Time lapse video" with the OK button,
you can set the desired shot lag in the on-screen menu that now
appears:
♦ Press the /
♦ Now switch to the next field, "Min", using the
/ buttons to set the minutes of the desired shot lag.
♦ Now switch to the next field, "Sec", using the
/ buttons to set the seconds of the desired shot lag.
Confirm your selection with the OK button. Afterwards, press the
♦
MENU button to close this sub-menu.
NOTICE
► When time lapse is activated, the motion sensors are deactivated.
Language
Here you can set English, German, Polish, Finnish, Swedish, Spanish,
French, Italian, Dutch, Portuguese, Czech or Slovak as the menu
language.
WK 8 A2
Set time lapse
Hr
Notification: Motion
sensors deactivated
buttons to set the hour of the desired shot lag.
Sec
button. Press the
button. Press the
GB │ IE │ NI │
23 ■