Silvercrest WK 8 A2 Quick Start Manual page 32

♦ Then switch to the next field using the
buttons to set the minutes for the start of the active phase.
♦ Then switch to the next field using the
buttons to set the hour for the end of the active phase.
♦ Then switch to the next field using the
buttons to set the minutes for the end of the active phase.
The settings made here apply every day. The camera will not record
any images outside of the active phase.
Confirm your selection with the OK button. Afterwards, press the
♦
MENU button to close this sub-menu.
Time lapse
With this function the camera automatically takes pictures at an
adjustable interval. This is useful if you want to observe the blooming
of plants or the like, for example.
Use the setting „Normal" to make individual videos. The setting in the
menu „Video length" determines the length of the recorded video.
The shot lag set here in the menu is the time gap between the individual
videos. The maximum number of videos recorded will correspond to
the setting in the menu „Target recording time". If the „Target record-
ing time" is set to „Off", then individual videos will be recorded until
the memory card is full or until the recording is stopped manually.
Use the setting „Time lapse video" to put time lapse photos together
to create a video. One second of video consists of five photos.
│ GB │ IE │ NI
■ 22
button. Press the
button. Press the
button. Press the
WK 8 A2
/
/
/