Video Connection - Silvercrest WK 8 A2 Quick Start Manual

♦ Close and secure the battery compartment. Ensure that the bat-
tery compartment cover clicks firmly in place.
♦ If you are operating the device on a mains adaptor (not supplied),
open the rubber seal on the left side of the camera and insert the
plug of the AC adapter cable into the DC socket
adapter must supply a direct-current voltage of 6 V with at least
1.5 A. Use a barrel jack whose interior polarity is connected to
the plus pole (
Operation via a mains adapter is possible even with batteries
inserted. If one power source fails, operation will be maintained
using the other.
CAUTION
► When using an AC adapter, the splash water protection of the
device is no longer given.

Video connection

NOTICE
► The camera can transfer the video signal to an external monitor
or the video/audio input of a television set. Please also follow
the instructions of the respective playback device.
♦ Connect the supplied TV cable
and an AV socket on a suitable external monitor.
WK 8 A2
).
28
to the camera's AV socket
16
. The mains
GB │ IE │ NI │
19
15 ■