Operating Instructions - Bosch 1613AEVS Operating/Safety Instructions Manual

Bosch power tools plunge router operating/safety instructions 1613aevs

Hide thumbs Also See for 1613AEVS:

User manual (34 pages)

Table of Contents

Available languages

BM 2610943371 07-06.qxp

ROUTER DUST COLLECTION

Your router is equipped with a dust extraction

hood for use when routing is done in the middle

of the workpiece, such as when creating slots

or routing patterns for inlays. If you have a shop

vacuum system, you can attach the dust

extraction hood for improved visibility, accuracy

and utility, particularly in freehand routing.

To attach, position as shown and secure

adapter to base with the thumbscrews provided

(Fig. 5).

The dust extraction hood can also be installed

with the hose outlet facing the front of the tool.

If the templet guide adapter is installed, it will

need to be reversed or removed to allow the

release lever to fit under the dust hood.

The dust extraction hood itself is sized to

accept 35mm vacuum hoses. Also included is

an adapter that will connect the hood to 1-1/4"

and 1-1/2" vacuum hoses.

INSTALLING TEMPLET GUIDE ADAPTER

Place templet guide adapter over the holes in

the center of the sub-base, and align the two

threaded holes in the bottom of adapter with

the countersunk holes in sub-base. Fasten

adapter with the screws provided. Note that

the adapter is reversible, so the release lever

may be positioned as desired (Fig. 6).

Bosch plunge routers are designed for speed,

accuracy and convenience in performing

cabinet work, routing, fluting, beading, cove-

cutting, dovetails, etc. This will enable you to

accomplish inlay work, decorative edges and

many types of special carving.

PLUNGING ACTION

The plunge feature simplifies depth

adjustments and will allow the cutting bit to

easily and accurately enter the workpiece. To

lower, push plunge lock lever to the left, apply

downward pressure until you reach desired

depth, and release pressure on lever to lock

(Fig. 7). The plunge lock lever is spring loaded

and returns automatically to the locked

position. To raise the router, push plunge lock

lever to the left, release pressure on router and

the router will automatically retract the bit from

the workpiece. It is advisable to retract the bit

whenever it is not engaged in workpiece.

7/24/06

9:03 AM

FIG. 5

M4 THUMB

Also available as an optional accessory is a

special dust collection for edge forming. Do not

use both hoods at the same time.

TEMPLET

MOUNTING