Huawei NetCol5000-A User Manual page 84

ACC Precision Air Conditioner Controller
User Manual
Menu
Home
Screen >
Settings >
Quick
Settings >
Date &
Time
Settings
Home
Screen >
Settings >
Quick
Settings >
System
Settings
Home
Screen >
Maint >
Performan
ce Maint
Home
Screen >
Maint >
Sensor
Adjust
Issue 02 (2016-11-30)
Parameter Description
Date format Sets the date display format
for the ACC.
Date Sets the date displayed on the
ACC.
Time Sets the time displayed on the
ACC.
Time zone Sets the time zone displayed
on the ACC.
Monitoring mode Sets the mode in which the
host computer software
monitors the precision air
conditioners.
Energy-saving Sets the fans to rotate at a low
mode
speed when there is no
requirement.
CW valve total Check or clear the total
runtime, runtime for each component.
compressor total
runtime, indoor
fan total runtime,
elec heater total
runtime,
humidifier total
runtime, cond
pump total
runtime, cond
pump run factor,
air filter total
runtime
Supply-air temp Sets the adjustment value of
adj value, each sensor when the detected
return-air 1 temp temperature or humidity varies
adj value, from the practical value. For
return-air humid example, if the detected return
adj value, air temperature is 1° C lower
supply-water than the value detected by
temp adj value, other devices, set the
return-water calibration value to 1° C.
temp adj value,
cold-aisle temp
adj value,
cold-aisle humid
adj value,
hot-aisle temp
adj value,
hot-aisle humid
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
A Parameter Description
Default Value
Consistent with the
current interface date
format
Consistent with the
current interface date
Consistent with the
current interface time
Consistent with the
current interface time
zone
Single mode
Off
0 h
0.0° C or 0.0% RH
78