ACH580 Ultra-Low Harmonic Drives Installation, Operation and Maintenance Manual
3. Make additional settings in the Primary settings menu – I/O menu
1
2
3
4
After the additional adjustments, make sure that the actual I/O
wiring matches the I/O use in the control program.
In the Main menu, select a I/O and press
the I/O menu.
Select the connection you want to check and press
(Select) (or
).
To view the details of a parameter that cannot be adjusted via
the I/O menu, press
(View).
To adjust the value of a parameter, press
value using
,
,
and
Note that the actual wiring must match the new value.
Go back to the Main menu by pressing
(Select) to enter
(Edit), adjust the
keys and press
(Save).
(Back) repeatedly.
ACH580 Ultra-Low Harmonic Drives Installation
45