ABB ACH580 Series Installation, Operation And Maintenance Manual page 43

ACH580 Ultra-Low Harmonic Drives Installation, Operation and Maintenance Manual
2
3
4
Note: You can adjust Process PI(D) in the PID control
submenu of the Primary Settings menu after you have
commissioned the drive to use PID control.
From the Main menu, select Primary settings.
Select Start, stop, reference and How do you control?
The default configurations are shown on the panel.
For HVAC, press Direct control via I/O.
For PID Control, press PID control, single motor.
ACH580 Ultra-Low Harmonic Drives Installation
43