Mitsubishi Electric MELFA FR CR800 Series User Manual page 113

9.2.6.2. Robot additional axis parameter setting
Click the [Set the parameters of the additional axis] button. The content set to [Travel axis] is applied to the robot
additional axis parameters of the simulation. Note that parameters are not automatically set if the above button is not
clicked.
* The additional axis parameters include these parameters.
AXMENO,AXJNO,AXUNT,AXGRTD,AXGRTN,AXACC,AXDEC,AXMREV,AXJMX,AXENCR,MEJAR
9-113 9-113