Distributed I/O - Siemens SIMATIC S7-300 Manual For Migrating

4 Hardware Migration
Note
Further information on the S7-400 automation system is available in the manual
S7-400, M7-400 Automation System Module Data.
https://support.industry.siemens.com/cs/ww/en/view/1117740
4.3.3

Distributed I/O

For S7-300/S7-400 as well as S7-1500, distributed I/Os can be connected via
PROFIBUS or PROFINET, for example, ET200SP, ET200MP, ET200AL,
ET200pro, ET200eco or ET200iSP. How and which I/O is used depends on some
factors (e.g., quantity framework/number of inputs and outputs, environmental
conditions). This is how the I/O may be maintained during migration.
Table 4-5 Interface modules for ET 200 I/Os
ET 200
Type
ET 200SP
ET 200MP
ET 200S
ET 200M
ET 200pro
ET 200iSP
ET 200eco
ET 200AL
ET 200R
ET 200L
Table 4-6 Properties of ET 200 I/Os
ET 200SP
ET 200MP
ET 200S
ET 200M
ET 200pro
ET 200iSP
ET 200eco
ET 200AL
ET 200R
ET 200L
Migration S7-300/S7-400 nach S7-1500
Entry ID: 109478811, V1.1,
Interface module
PB
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
ET 200
Type
Control cabinet, IP20, compact size, fine modular
Control cabinet, IP20, multi-channel
Control cabinet, IP20, small size, fine modular
Control cabinet, IP20, modular, for hazardous zone 2/21
Without control cabinet, IP6x, M12 connection, modular
Hazardous area zone 1, 2, 21, 22
Without control cabinet, IP6x, M12, block I/O
Without control cabinet, IP6x, M8 M12 connection, flexible
mounting through front or cross-type screwing, typical for
handling and mounting applications
Digital input/output module for robots
IP20, block I/O
05/2017
Interface module
PN
yes yes
yes yes
yes yes
yes yes
yes yes
no yes
yes yes
yes yes
no yes
no yes
Properties
Integrated in
TIA Portal
20