Siemens SINAMICS S120 Equipment Manual page 213

Article number
Max. cable length
3) 4)
(total of all motor cables and DC link)
- Shielded
- Unshielded
Degree of protection
Dimensions
- Width
- Height
- Depth
Frame size
Weight
Recommended fuse
5)
- Number per phase (connected in parallel)
- Rated current
- Frame size acc. to IEC 60269
Minimum short-circuit current
The specified power loss is the maximum value at 100% capacity utilization. The value in normal operation is lower.
1)
Total sound pressure level of Active Interface Module and Active Line Module.
2)
The cable lengths are valid for use in the IT system. When used in the TN system, the cable lengths are shortened to
3)
30% of the specified value.
When used in the TN system and when operating the connected Motor Modules with increased pulse frequency, you
4)
will receive the permitted cable lengths upon request.
To achieve a UL-approved system, it is absolutely essential to use the fuse types specified in the table.
5)
Minimum current required for reliable triggering of the protective devices.
6)
Air-cooled chassis power units
Manual, 07/2019, 6SL3097-4AE00-0BP9
6SL3330– 7TE32–1AA3
m
m
mm
mm
mm
kg
kA
6)
7TE32–6AA3
2700 2700
4050 4050
IP20 IP20
326 326
1400 1400
356 356
FX FX
95 95
3NE1230-2 3NE1331-2
1 1
315 350
2 2
6.2 10.5
Line Modules
5.4 Active Line Modules
7TE33–8AA3 7TE35–0AA3
2700 2700
4050 4050
IP20 IP20
326 326
1533 1533
545 545
GX GX
136 136
3NE1334-2 3NE1436-2
1 1
500 630
3 3
10.5 8
211