Table of Contents
Advertisement
Figure 83.
Fixing Chain Bracket Assembly on the Pole (3)
4
Figure 84.
Fixing Chain Bracket Assembly on the Pole (4)
Off-the-ground work
When fixing the chain bracket assembly on the pole, ensure to check the level of
bracket. After finishing the installation, adjust the level minutely.
If the leveling is poor, adjust the position of fasteners used to fix the chain bracket
assembly.
Lifting HRU
To lift the HRU, do the following:
5G NR HRU Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
1
2
Check the level of chain bracket assembly on a pole and adjust the level.
Chapter 2 Installing System
M10 Hex. Nut
Clamp Nut-2
If it is level, the bubble of the
spirit level is positioned at the
center of both lines.
Confidential
80
Hide quick links:
Advertisement
Table of Contents
