Table 31. Construction Situation Checklist - Samsung 5G NR Installation Manual

Hybrid radio unit

Table of Contents

On-site Inspection and Inspection Checklist

The on-site inspection is to perform inspection visually or using instruments for

each specification, standard, and installation status, based on the inspection

checklist at the site where the system is installed.

The inspector must record the results onto the inspection checklist during or after

field inspection.

Sharing Inspection Results and Taking Corrective Actions

The inspector must share the inspection results, inspection checklist and corrective

actions, with an installation operator. The installation operator must take the

corrective actions, if necessary, after reviewing the requirements.

Checking the Results of Corrective Actions

The inspector must check if the corrective actions are properly taken. If they are

not sufficient, the inspector must ask the installation operator to take the corrective

actions again.

Sharing the Results of Corrective Actions and Preparing Preventive Plan

After the corrective actions are all completed, the inspector must share the results

with the installation operator and relevant departments. The inspector must prepare

a preventive plan to avoid the reoccurrence of the similar problems.

Construction Situation Checklist

The table below outlines the checklist to inspect the installation of the HRU and

other devices.

Table 31.

Construction Situation Checklist

Table of Contents