Figure 36.
Fixing HRUs on the Pole (4)
HRU-1
When installing the HRU, the tilting angle pointer of the unit bracket should point
to 0°.
[Angle pointer position for unit bracket with
5
5G NR HRU Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
HRU-0
0° tilt when installing the HRU]
Use the compass to check the azimuth of the front view of the HRU.
1
HRU-1
2
HRU-1
Tilting angle scale of the unit bracket
Confidential
Chapter 2 Installing System
M8 Hex. Bolt
(Washer Assembly)
38