Cbc10 Communication Board For Can Bus - Siemens SINAMICS S120 Installation And Start-Up Manual

Prerequisites for commissioning

2.2 CBC10 Communication Board for CAN bus

2.2 CBC10 Communication Board for CAN bus
Introduction
The CBC10 Option Board (CAN Communication Board) is used to connect drives in the
SINAMICS S120 drive system to higher-level automation systems with a CAN bus.
Figure 2-1 View of the CBC10 Option Board
The CANopen Option Board uses two 9-pin Sub D connectors for the connection to the CAN
bus system.
The connectors can be used as inputs or outputs. Unused pins are plated through.
The following baud rates (among others) are supported: 10, 20, 50, 125, 250, 500, 800
kBaud, and 1 MBaud.
2-2
Commissioning Manual, 12.2004 Edition, 6SL3097-2AA00-0BP1
CANopen interface