Column Fixing - Bosch TCE 4460 Original Instructions Manual

4.2.3

Column fixing

1. Remove the external elastic ring with appropriate
pliers and take off the pin.
2. Align the cylinder rod and the tie rod holes.
3. Insert the air tube in the slot in the machine box.
1
Robert Bosch GmbH
4. Fix the column to the cylinder tank by inserting
5. Insert again the pin passing through the cylinder
6. Connect the longer pipe (1) on the side joint of the
2
Initial commissioning | TCE 4460 | 29
the pin with a hammer and tighten the fulcrum-pin
screw.
rod and tie rod holes; put back in place the external
elastic ring.
locking pedal locking jaws.
1
en
|
1 695 105 428 2010-02-16