Canon Staple Finisher-D1 Service Manual page 165

9) Remove four screws, and then remove four fixings of the upper output tray and lower output tray.
x2
10) Open the front cover.
<Staple Finisher-D1>
F-6-22 F-6-22
6
Installation > Unpacking and Checking the Contents > Unpacking Procedure
<Booklet Finisher-D1>
6 Installation > Unpacking and Checking the Contents > Unpacking Procedure
Caution:
Hold the output tray while removing the fixings lest the output tray
jerks.
x2
F-6-20 F-6-20
11) Remove all pieces of packing tape used inside the finisher, and then
remove the cushioning material from the stapler unit.
F-6-23 F-6-23
6-12
F-6-21 F-6-21
F-6-24 F-6-24
6-12