4
Parts Replacement and Cleaning Procedure > Motors > Removing the Processing Tray Paper Retainer Motor (M118)
Removing the Inlet Feed Motor (M200)
1) Remove the rear cover
2) Remove the motor connector and the tension spring.
Remove the 2 screws and then remove the inlet feed motor.
(upper).
(Refer to page 4-19)
Removing the Processing Tray Paper Retainer Motor (M118)
1) Remove the rear cover
2) Remove the motor connector and the tension spring. Remove
the 2 screws and then remove the processing tray paper
(upper).
(Refer to page 4-19)
retainer motor.
4
Parts Replacement and Cleaning Procedure > Motors > Removing the Processing Tray Paper Retainer Motor (M118)
F-4-159
F-4-160
4-66
4-66