Canon Staple Finisher-D1 Service Manual page 163

1) Open the container box, and then take out the accessory box and
cushioning materials.
4) Remove two slope boards and two fixing pins.
MEMO:
The fixing pins are attached to the slope board with the adhesive tape.
6
Installation > Unpacking and Checking the Contents > Unpacking Procedure
2) While holding the top of the finisher, raise one side of the finisher
to remove the cushioning material.
Be sure to pull the plastic bag toward the other cushioning material
completely.
F-6-12 F-6-12
F-6-15 F-6-15
6 Installation > Unpacking and Checking the Contents > Unpacking Procedure
3) While holding the top of the finisher, raise the other side to remove the
F-6-13 F-6-13
5) Using two fixing pins, secure the slope boards to the pallet.
cushioning material and plastic bag.
F-6-16 F-6-16
6-10
F-6-14 F-6-14
6-10