The Menu Window - Canon Oce BLM550+ Operation Manual

The MENU Window

Introduction
MENU
shows the settings that are not changed during day-to-day operation.
These settings include
• Change the Access Level
• Change the display language
• Advanced machine settings that are accessed by a person who has the correct access-code.
Button overview
The MENU Window Buttons
Button
ACCESS LEVEL
CURRENT LANGUAGE
AXES
BRIDGE
SERVICE OPTIONS
TEST
COUNTERS
-RESET
Information
The Touch Screen has five different access levels
• Operator
• Supervisor
• Service
• Distributor
• Factory
Touch ACCESS LEVEL and select the correct level from the list.
The last three levels are protected by access codes. To protect the
job settings, the supervisor level allows jobs to be locked.
Touch one of the flags to select the language you need.
Touch AXES to re-reference individual axes. Supervisor access
level is needed for this function.
Other functions on this button are used by the service engineer.
Touch BRIDGE to re-reference the bridge axes. Supervisor access
level is needed for this function.
Other functions on this button are used by the service engineer.
This button is used by the service engineer.
This button is used by the service engineer.
The counters display the
• number of books that have been made
• number of sheets that have been processed
• number of stitches that have been used
Touch RESET to reset the book, sheet and stitch counter. Use RE‐
SET after operator maintenance to the stitch head.
Touch and hold RESET. A red line appears. The red line fills from
left to right. Hold RESET until the red line reaches the right-hand
side.
The MENU Window
Chapter 4 - The User Interface 39