Configuring Trap Control (Professional Vtr Category Variables) - Sony BKMW-E3000 Installation Manual

1-4-3. Configuring Trap Control (Professional VTR Category Variables)

In this window, the setting for control of trap sending is available.
These traps become valid notifications for fine monitoring e-VTR with SNMP Manager.
Time difference between Local Time and GMT
. Time Difference
Selects the time difference between the local time and GMT.
Trap Control
. Channel Condition (Video) Trap
This is the trap that notices when the [CHANNEL CONDITION] on the control panel of the e-VTR
turned into RED level.
When this item is set to "on", the tape position that detected RED level is specified from the time code
information included in the trap notice message.
. Channel Condition (Audio) Trap
This is the trap that notices when the [CHANNEL CONDITION] on the control panel of the e-VTR
turned into RED level.
When this item is set to "on", the tape position that detected RED level is specified from the time code
information included in the trap notice message.
. Lost Lock Trap
This is the trap that notices when Servo Lost Lock status was generated during PLAY mode.
When this item is set to "on", the tape position that Servo Lost Lock status was generated is specified
from the time code information included in the trap notice message.
To enable the settings
Click the Execute button.
m
. The changed contents are stored in e-VTR even if the power is turned off.
To cancel the operation, click the Reset button.
. To enable setting of the trap control from SNMP Manager, it is necessary to enter the "Read-Write
Community" on the SNMP Agent Variables Window. (Refer to "1-4-1. Configuring SNMP".)
BKMW-E3000
1-27 (E)