Table of Contents
Advertisement
10. Attach the IF-885 board.
For the recorder
(1) Attach the coaxial connector converter to the
ETHERNET panel using the two screws.
n
Be sure to position the coaxial connector converter
as shown in the figure.
Coaxial connector converter
ETHERNET panel
BVTT3 x 6
Upper side
Lower side
(2) Attach the IF-885 board to the ETHERNET panel
using the two screws (BVTT3 x 6) of the supplied
accessories.
BVTT3 x 6
(Supplied
accessory)
IF-885 board
ETHERNET panel
BKMW-E3000
For the player
(1) Attach the IF-885 board to the ETHERNET panel
(2) Affix the blank sheet of the supplied accessories
ETHERNET panel
Blank sheet
(Supplied accessory)
Red
Yellow
Blank sheet
(Supplied accessory)
11. Attach the ETHERNET panel to the VTR.
(1) Arrange the connection cord and the harness
(2) Connect the connection cord to the connector CN2
IF-885 board
CN3
using the two screws (BVTT3 x 6) of the supplied
accessories.
onto the ETHERNET panel.
ETHERNET panel
(LED) of the supplied accessories as shown in the
figure.
on the IF-885 board, and connect the harness
(LED) to the connector CN3 on the IF-855 board.
Harness (LED)
(Supplied accessory)
Connection cord
CN2
(Supplied accessory)
BVTT3 x 6
(Supplied
accessory)
IF-885 board
1-11 (E)
Advertisement
Table of Contents
