Table of Contents
Advertisement
Setting up with the administration tool
Caution
• For security purposes, be sure to change the default password.
• The password must be a combination of both letters and
numeric characters. Passwords consisting of all lowercase, all
uppercase or all numeric characters are not allowed.
• A password may be seven or eight characters long. Passwords
fewer than seven characters long are not allowed. Also, if nine
or more characters are entered, only the first eight characters
are set as the password.
• If an error is made in entering the password, or the values
entered into the "Password" and "Retype password" fields do
not match, an error message is displayed. If this occurs, enter
the password again.
User password
Upon clicking "User password", the following
screen is displayed. This screen is utilized to
change the user password used to log in to the
system.
Enter the desired password in the "Password" and
"Retype Password" fields. Click "Setting" to
complete the configuration.
Caution
• For security purposes, be sure to change the default password.
• The password must be a combination of both letters and
numeric characters. Passwords consisting of all lowercase, all
uppercase or all numeric characters are not allowed.
• A password may be seven or eight characters long. Passwords
fewer than seven characters long are not allowed. Also, if nine
or more characters are entered, only the first eight characters
are set as the password.
• If an error is made in entering the password, or the values
entered into the "Password" and "Retype password" fields do
not match, an error message is displayed. If this occurs, enter
the password again.
Reset of setting
Upon clicking "Reset of setting", the following
screen is displayed. This screen is used to restore
the factory default Network & Access control
settings and/or administrator password.
Select the items to be initialized and click "Setting
confirmation" to complete initialization.
Save & load
Upon clicking "Save & load", the following screen
is displayed. This screen is used to save the current
settings of the unit or to upload settings saved as a
file on the host PC to the unit.
To save the current setting of the unit on
the host PC:
Right-click on "ps3tool.conf" and then select
"Save Target As" or "Save Link As".
Caution
This procedure may vary depending on the web browser used.
For details, refer to the instructions for the web browser.
Setting up with the administration tool
27
Advertisement
Table of Contents
