Sony FVS-1000 Series Operation Manual page 31

COLOR menu
Item
B/W
LAMP
IM BLACK (imager black)
IRIS
IM GAIN (imager gain)
LENS
IRIS
FOCUS
ZOOM
FILTER ND (Neutral
Density filter)
CC (Color
Conversion filter)
GAMMA
VIDEO GAMMA
GAMMA CURVE
MASTER
RED
GREEN
BLUE
FILM GAMMA BANK
CRT GAMMA
Setting(s)
Adjust the optical color of the lamp using the control knobs.
M (MASTER): Adjust the luminance level.
R (RED): Adjust the red level.
G (GREEN): Adjust the green level.
B (BLUE): Adjust the blue level.
Adjust the master black level using the control knobs.
M (MASTER): Adjust the luminance black level.
R (RED): Adjust the black level of red.
G (GREEN): Adjust the black level of green.
B (BLUE): Adjust the black level of blue.
Adjust the iris using the control knob.
Adjust the camera gain using the control knobs.
M (MASTER): Adjust the luminance gain level.
R (RED): Adjust the gain of red.
G (GREEN): Adjust the gain of green.
B (BLUE): Adjust the gain of blue.
Adjust the iris.
Adjust the focus.
Adjust the zoom
Select an ND filter using the leftmost control knob.
0: Clear
1: 1/4
2: 1/16
3: 1/64
Select the CC filter using the second control knob from the left.
0: Cross filter
1: 3200K
2: 4300K
3: 6300K
Adjust the gamma of the linear domain.
R (RED): Adjust the video gamma of red.
G (GREEN): Adjust the video gamma of green.
B (BLUE): Adjust the video gamma of blue.
Adjust the gamma curve at the 11 point.
Adjust the gamma curve of red at the 11 point.
Adjust the gamma curve of green at the 11 point.
Adjust the gamma curve at blue the 11 point.
Adjust the gamma of the logarithmic domain.
R (RED): Select a film gamma table of red from 16 banks.
G (GREEN): Select a film gamma table of green from 16
banks.
B (BLUE): Select a film gamma table of blue from 16 banks.
Set the CRT gamma to ON or OFF.
ON: SMPTE-275M (When set to ON, the EXECUTE button is lit.)
OFF: Through
Mode Operation
No. No.
02 2 9 0
10 2 9 0
18
2 9 0
14 2 9 0
18
2 9 0
19 2 9
26 2 9 0
24
22
2 9
31 4 9
(Continued)
29