Sony Vision Exchange PEQ-C100 Help Manual page 70

The Auto search function used when logging in may not operate correctly, depending on the firewall settings of the operating
environment. If this occurs, change the type of "Network Location" to "Private" in Windows, and check that the Auto search
function operates correctly. Alternatively, enter the IP address directly, without using the Auto search function, and log in.
To log in using a room name, an environment in which the Auto search function operates correctly is required.
If a device name contains a period character, the Auto search function and room name login function do not operate correctly. In
order to use these functions, edit the device name so that it does not contain a period character.
To log in using a token
Login is supported using token authentication, without a passcode, depending on the main unit and Pod settings.
Configuration is required beforehand in order to log in using token authentication.
On the [Login] screen of Vision Exchange App, press
Authentication] switch to the [On] position, and enter the character string set on the main unit or Pod in [User Token].
When logging in using token authentication, enter the IP address of the main unit and Pods using Vision Exchange App,
and press [Login].
To display the Home screen of Vision Exchange App
To return to the Home screen from the screen of another function in Vision Exchange App, press
left of the screen.
Related Topic
Installing Vision Exchange App on a User Device
Configuring the Vision Exchange App
to display the [Setting] screen, move the [User Token
5-011-887-11(1) Copyright 2019 Sony Corporation
70
displayed at the top