Sony Vision Exchange PEQ-C100 Help Manual page 69

If a room name has been configured for the main unit or a Pod, you can also log in using a room name instead of an IP address.
**
If connection using tokens is configured on the [Setting] screen, entry is not required.
Log in to the specified main unit or Pod to display the [Home] screen.
After logging in, the video from the user device is shown on the main unit and Pod (mirroring), remote operation is
enabled, and snapshots captured during a session can be downloaded to the user device.
Note
The passcode is an identifier to prevent incorrect connection, not an access control item. To apply access controls, use user
token authentication.
Connection is not possible if the version of Vision Exchange App on the user device is lower than the version of Vision Exchange
on the main unit and Pod.
Mirroring, remote operation, and downloading may not be available after logging in if access controls are configured on the main
unit and Pods.
69