Help Guide (for end users)
Vision Exchange Version 1.3
PEQ-C100/PEQ-C130/PES-C10
Using the External Control Function
Enter the IP address of the main unit or Pod that you want to operate remotely in the URL bar of a web
1
browser.
The web browser login screen appears.
Enter the passcode of the main unit or Pod and select [Controller] for the login mode to log in.
2
The same content shown on the main unit or Pod to which you are logged in is displayed.
Operate the main unit or Pod using the buttons displayed on the screen.
3
Note
The passcode is an identifier to prevent incorrect connection, not an access control item. To apply access controls, use user
token authentication.
5-011-887-11(1) Copyright 2019 Sony Corporation
53