Toshiba Strata DK 16 Installation And Maintenance Manual page 292

REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
SECTION 100-816-600
MARCH 1993
DIGITAL AND ELECTRONIC TELEPHONE RINGING TONES
STEP
1 Enter Program Mode.
At the >MODE prompt, enter P R O G CR.
2 Enter Program Number 80
Press CR.
3
Refer to the System Record Sheet and enter the required
port number.
Example: Port 01, enter 0 1.
Press # key.
4
The system will display 1 or 2 corresponding to tone 1 or tone 2.
5 Refer to the System Record Sheet and change if required.
Example: Tone 2, enter 2.
6 To Exit Program/Store Data
A) To store data, press CR.
B) Continue returning to step 3 until all data has been entered
for this program.
C) To exit this program, press # # CR.
NOTE:
Programs 81 ~ 89 use Type 2 procedure.
TABLE RM-AL
PROGRAM 80
ACTION
-42-
DISPLAY/PRINTOUT
>MODE PROG
P
P 80
P80
P80 01
P80 01# 1
P80 01# 1 2
P80 01# 1 2
P80 ##
P