Cabinet Modules
6.4 Heat Exchanger Modules
6.4.2
Interfaces
6.4.2.1
General information
This chapter describes only those interfaces in the cabinet unit that require additional
connection work by the customer. All other interfaces are pre-wired at the factory and are not
designed for customer connections.
Note
Additional information
All connections to be established on the plant side as well as the interfaces for integration
into the plant control system are described in the circuit diagrams and terminal diagrams on
the customer DVD supplied with the device.
6.4.2.2
Overview of the components and interfaces
The main components and interfaces of the control box in the Heat Exchanger Module are
shown in the following diagram.
Figure 6-22
Heat Exchanger Module - overview of the components and interfaces
194
Cabinet Modules liquid cooled
Manual, 10/2015, A5E37067587A