Augmenting The Machine Control Panel And Handwheel In The Hw Configuration - Siemens SINUMERIK 840D sl Commissioning Manual

PLC commissioning
5.2 Creating a SIMATIC S7 project (PROFIBUS)
5.2.4

Augmenting the machine control panel and handwheel in the HW configuration

Sequence and requirements
Configuring sequence for a PROFIBUS machine control panel:
1. Configuring the properties of the PROFIBUS DP interface.
2. Augment the machine control panel and handwheel in HW Config.
3. Modify the machine control panel in the OB100.
If a handwheel has been configured, isochronous mode on the PROFIBUS is required. The
PROFIBUS address for the machine control panel is "6". To expand the machine control panel,
you need the device master data (GSD file) with the SINUMERIK machine controlled panel.
This file is part of the STEP 7 package in the toolbox and contains information that a DP master
system requires to link the MCP as DP slave in its PROFIBUS configuration.
Procedure for the installation:
1. Search in the HW Config under "Tools" > "Install GSD file..." in the installation directory of
the toolbox for the corresponding GSD directory under:
2. Choose the corresponding language you want to install.
3. Select "Install".
4. Exit with "Close".
Augmenting the machine control panel in HW Config
You have created an NCU and an NX in the HW Config and installed the GSD file for the MCP.
Procedure:
1. Search under "PROFIBUS DP" → "Further field devices" → "NC/RC" → "MOTION
CONTROL" in the hardware catalog for the "SINUMERIK MCP" module.
2. Left-click to select the "SINUMERIK MCP" module and drag it to the chain for the
"PROFIBUS DP master system" in the "Station design" station window.
3. After releasing the mouse key, you have inserted the machine control panel.
4. Select the "MCP" and enter the PROFIBUS address 6 under "Object properties" →
"PROFIBUS..." button → "Parameter" tab → "Address" input field.
62
..\8x0d\GSD\MCP_310_483
CNC Commissioning: NC, PLC, Drive
Commissioning Manual, 12/2019, A5E48312804B AA