Siemens SINUMERIK 840D sl Commissioning Manual page 118

Commissioning NC-controlled drives
6.3 Guided commissioning of SINAMICS drives
Procedure:
1. Select "Change >" to configure the infeed:
2. The characteristic data of the infeed detected by the automatic device configuration is
displayed:
The following functions can also be activated:
– If you activate the "LED to flash for recognition" option, then the selected infeed will flash
– Select the filter type which is connected in front of the infeed from the list under "Line
118
alternately red-green.
filter". If it is a filter with temperature monitoring (AIM = Active Interface Module), then this
is automatically activated with the selection (default setting). This option must be
activated if you have inserted a Basic Line Filter in front of the AIM to dampen the
interference emission and RFI suppression.
CNC Commissioning: NC, PLC, Drive
Commissioning Manual, 12/2019, A5E48312804B AA