Siemens SINUMERIK 840D sl Commissioning Manual page 4

Preface
Target group
This document is intended for commissioning personnel.
The plant or system is installed, connected, and ready to start. The Commissioning Manual
contains all the necessary information or at least references for the following steps, e.g.
configuring the individual components.
Standard scope
This documentation only describes the functionality of the standard version. Additions or
revisions made by the machine manufacturer are documented by the machine manufacturer.
Other functions not described in this documentation might be executable in the control. This
does not, however, represent an obligation to supply such functions with a new delivery or when
servicing.
For the sake of simplicity, this documentation does not contain all detailed information about all
types of the product, and cannot cover every conceivable case of installation, operation, or
maintenance.
Note regarding the General Data Protection Regulation
Siemens observes standard data protection principles, in particular the principle of privacy by
design. For this product, this means: this product does not process / store any personal data,
only technical functional data (e.g. time stamps). If a user links this data with other data (e.g.
shift schedules) or stores personal data on the same storage medium (e.g. hard disk), and thus
establishes a link to a person or persons, then the user is responsible for ensuring compliance
with the relevant data protection regulations.
Technical Support
Country-specific telephone numbers for technical support are provided on the Internet at the
following address in the Contact (https://support.industry.siemens.com/sc/ww/en/sc/2090)
area.
EC Declaration of Conformity
The EC Declaration of Conformity for the EMC Directive can be found on the Internet at the
following address (https://support.industry.siemens.com/cs/ww/en/ps/14604/cert).
4
CNC Commissioning: NC, PLC, Drive
Commissioning Manual, 12/2019, A5E48312804B AA