Intelligent Dynamic Response Adjustment - Function - Siemens SINUMERIK 840D sl Commissioning Manual

Constraints
Please note the following supplementary conditions:
● The "Moment of inertia estimator" function module (bit r0108.30) can be used to determine
the moment of inertia of the axis (Example).
● For the adaptation of the drive adaptation factors 1 ... 4, telegram (Page 220) 146, 148 or
149 is required.
● The "Controller parameter adaptation" function module (bit r0171.29) is activated.
● The following conditions apply to the adaptation of "APC / APC ECO Tv (p3769)" and "APC /
APC ECO filter (p3766)":
– A SINUMERIK license for the "Advanced Position Control" (6FC5800-0_M13-0YB0)
– A SINUMERIK license for the "Advanced Position Control ECO"
8.6.2 Intelligent dynamic response adjustment – function
Benefits
The "Intelligent dynamic response adjustment" function is used to optimize the following
characteristics of a machine tool by adapting control parameters:
● Shorter machining times
● Increased dynamic response
● Greater accuracy
● Enhanced precision
The machine manufacturer is supported in the commissioning of the function by dialogs on the
user interface: "Commissioning" → softkey "NC" → Menu forward key → softkey"Adaptations"
operating area. The softkey is shown after setting the option, and only for the "Manufacturer"
access level.
Precondition
CNC Commissioning: NC, PLC, Drive
Commissioning Manual, 12/2019, A5E48312804B AA
option is required to use the "Advanced Position Control (APC)" function module (bit
r0108.7) with SINUMERIK.
(6FC5800-0_M12-0YB0) option is required to use the "Active Vibration Suppression
(AVS/APC-ECO)" function module (bit r0108.19) with SINUMERIK.
Software option
In order to use this function a license is required for the following option:
"Intelligent dynamic response adjustment" (6FC5800-0_S23-0YB0)
NC commissioning
8.6 Adaptations
257