Overview: Line Filters - Siemens SINAMICS S120 Equipment Manual

Line Connection Booksize

2.2 Overview: line filters

2.2 Overview: line filters
2.2
In conjunction with a line reactor and an EMC-compliant plant configuration, line filters limit
the electromagnetic emissions from the Power Modules to the limit values of Class A1 acc.
to EN 55011 or Category C2 acc. to EN 61800-3.
Optional line filter series that are coordinated with the power range are also available with
the SINAMICS S120 converter system. These line filters differ with regard to the frequency
range in which they reduce the conducted emissions.
There are two different line filter versions when using Active Line Modules.
Basic Line Filter for Active Line Modules
Basic Line Filters are mainly effective in the frequency range from 150 kHz to 30 MHz, which
is the important range to be compliant with the Standard. They have been designed with use
with systems and equipment with a maximum total cable length of 150 m (shielded).
Wideband Line Filter for Active Line Modules
Wideband Line Filters can, beyond this, also effectively limit the low-frequency harmonics
from 2 kHz and above that are fed back into the line supply; this protects additional loads
connected to the same line supply against disturbances and damage. The maximum total
cable length is 350 m (shielded).
Line filters for Smart Line Modules
The line filters for Smart Line Modules are specified for total lengths of up to 350 m
(shielded).
Table 2-1
Basic Line Filter for Active Line Modules
16 kW
36 kW
55 kW
Wideband Line Filter for Active Line Modules
16 kW
36 kW
55 kW
80 kW
120 kW
Line filters for Smart Line Modules
5 kW
10 kW
16 kW
36 kW
2-2
Overview
Order No.
6SL3000-0BE21-6DAx
6SL3000-0BE23-6DAx
6SL3000-0BE25-5DA0
3SL3000-0BE21-6AAx
3SL3000-0BE23-6AAx
3SL3000-0BE25-5AAx
3SL3000-0BE28-0AAx
3SL3000-0BE31-2AAx
6SL3000-0HE15-0AAx
6SL3000-0HE21-0AAx
6SL3000-0BE21-6DAx
6SL3000-0BE23-6DAx
Equipment Manual for Booksize Power Units
Equipment Manual, (GH2), 03/2006 Edition, 6SL3097-2AC00-0BP3