Chapter 1 Overview
1
68
(3) Upon completion of registration, execute [File (F)] and [Write (W)].
(4) Return to the Configuration Editor [Hardware Configuration] for Controller A, and
execute [File (F)] and [Save (S)].
(5) Download the parameters just set.
To download the parameters, execute [File (F)] and [Download (D)] from the Set
Parameter window.
(6) Upon completion of downloading, click [Tool and Ether Card (B)], and check if the
parameters are successfully set.
The downloaded network parameters become effective after restarting the EN5
module.
Figure 1-42
model 1000 Loop Controller L1 User's Manual - Basic Hardware