Siemens SENTRON 7KT1681 Manual page 35

P05.01
P05.02
P05.03
M07 Communication for 7KT1682 only
P07.01
P07.02
P07.03
P07.04
P07.05
P07.03
P07.04
P07.05
7KT multimeter
Manual, 08/2018, 2514284149-01
OFF (hour counter deactivated): The device does not display the page for hour
counter measurement.
• OFF: The partial hour counter is not incremented.
• ON: Partial hour counter is incremented when the device is measuring
energy.
• If the partial hour counter is linked to one of the internal variables (LIMn),
the partial hour counter is only incremented if this condition is true.
Channel number(n) of an internal variable which was used in the previous
parameter.
Example:
If the partial hour counter needs to count the time while one measurement is
above a threshold that was defined by LIM3, program LIMx in the previous
parameter and enter "3" in this parameter.
Address
Baud rate
Data format
Stop bits
Protocol
Data format. 7-bit settings only available for the ASCII protocol.
Number of stop bits
Selection of communication protocol
Unit Default Range
– 01 01 ... 255
bps 9600
•
•
•
•
•
•
•
•
– 8 bit - n
•
•
•
•
•
1 1 ... 2
Modbus RTU •
•
Description
3.4 Parameterization
1200
2400
4800
9600
19200
38400
57600
115200
8 bit, no parity
8 bit, odd
8 bit, even
7 bit, odd
7 bit, even
Modbus RTU
Modbus ASCII
33