Task Flow - Sony NBS-CN110 Operating Instructions Manual

Task flow

To build a wireless LAN environment, you must configure both the
Access Point and the Wireless LAN PC Card.
Required tasks depend on the state of your Access Point and Wireless
LAN PC Card. The table below lists their states and tasks required for
building a wireless LAN environment.
Access
Point
*1 Refer to the operating instructions of the Access Point.
*2 See "Inserting the Wireless LAN PC Card" (page 14) and following sections in
*3 See "To establish communication with the Access Point" (page 56) and
*4 Refer to the operating instructions of the Access Point.
8
Wireless LAN PC Card
1. Connect the Access
Point.
2. Insert the Wireless
LAN PC Card into a
computer, set up the
Windows-based
environment and
New
install software. (*2)
3. Register the Access
Point using the
Wireless Palette. (*3)
4. Configure the Access
Point. (*4)
1. Insert the Wireless
LAN PC Card into a
computer, set up the
Windows-based
environment and
install software. (*2)
In use
2. Register the Access
Point using the
Wireless Palette. (*3)
this manual.
succeeding sections in this manual. For further information, see the Wireless
Palette Help files.
New
1. Connect the Access
2. Register the Access
3. Configure the Access
• To communicate with
1. Register the Access
In use
Point. (*1)
Point using the
Wireless Palette. (*3)
Point. (*4)
an Access Point
previously used in
another wireless LAN
environment from a
computer containing
the Wireless LAN PC
Card.
Point using the
Wireless Palette. (*3)