Sony NBS-CN110 Operating Instructions Manual page 112

34
3
Click the Configuration tab to verify the settings.
Confirm that the following are displayed under
"The following network components are
installed."
– NetBEUI -> Sony PCWA-C100 Wireless PC Card
– TCP/IP -> Sony PCWA-C100 Wireless PC Card
– Client for Microsoft Networks
– File and printer sharing for Microsoft Networks
Also confirm that Client for Microsoft Networks is
displayed under the Primary Network Logon
drop-down menu.
If everything is displayed, proceed to "To verify
the computer name and workgroup" on page 39.
If any of these components are missing, you must
add each component individually.
For further instructions see below.
"To add TCP/IP" on this page.
"To add NetBEUI" on page 36.
"To add Client for Microsoft Networks" on page
36.
"To add File and Printer Sharing for Microsoft
Networks" on page 37.
When you have added all components, proceed to
"To specify the IP address" on page 38.
To add TCP/IP
If TCP/IP -> Sony PCWA-C100 Wireless PC Card is
not displayed in step 3 above, follow the steps below.
1
Click Add on the Configuration tab.
The Select Network Component Type dialog box
appears.