The power requirement of the Gigabit Ethernet/82543 PMC Module,
which is supplied by the carrier card, is detailed below in
Requirement
Maximum power
Maximum DC amps (+3.3 V)
When you add PMCs to your system, verify that the combined power
!
(wattage) required for the PMCs does not exceed the system's power
supply rating. Refer to your computer system documentation for this
Caution
information.
Environmental Requirements
The Gigabit Ethernet/82543 PMC Module features the industry-standard
PMC form factor. The PMC module must be placed on a carrier card.
The conditions listed below refer to the surroundings of the board within
the user environment.
Note:
lating around the board and not to the component temperature.
Board Damage
!
Do not operate the product outside the specified environmental limits.
High humidity, temperature and condensation may cause short circuits.
Caution
Therefore, ensure that the product is completely dry and there is no
moisture on any surface before applying power.
Gigabit Ethernet/82543 PMC Installation and Use
5V Rail : 0.4mAmp maximum
Table 3-2. Power Requirements
Operating temperatures refer to the temperature of the air circu-
Table
Value
5.71W
1.73A
B
3-2.
B-3