Creating In-House Texts - Siemens SINUMERIK 840D sl Commissioning Manual

Configuring tool management

9.9 Creating In-House Texts

Entries
Icon9
Example
9.9 Creating In-House Texts
This chapter describes the procedure used to incorporate your own texts. The texts are
stored in the "sltmlistdialog_xxx.ts" file.
If you want to store the texts in the standard languages, you must create a separate file for
each language. The files have different language codes. Set the appropriate language code
for "xxx".
Language-specific files
Create the following files for the texts.
German
English
French
Spanish
Italian
Chinese
80
Meaning
Icon representing the tool type.
The icons are displayed in the following windows:
"Tool list" in the "Type" column
•
"New tool - Favorites" in the "Tool position" column
•
"New tool - Milling cutter 100 - 199" in the "Tool position" column
•
"New tool - Milling cutter 200 - 299" in the "Tool position" column
•
"New tool - Special tool 700 - 900 in the "Tool position" column.
•
The icons are in ".png" format. They are stored according to image resolution
in the following directories:
oem/sinumerik/hmi/ico/ico640, or ico800, or ico1024
user/sinumerik/hmi/ico/ico640, or ico800, or ico1024
sltmlistdialog_deu.ts
sltmlistdialog_eng.ts
sltmlistdialog_fra.ts
sltmlistdialog_esp.ts
sltmlistdialog_ita.ts
sltmlistdialog_chs.ts
Commissioning Manual, 07/2007, 6FC5397-1DP10-2BA0
HMI sl (IM9)