Machine Data Display Filter - Siemens SINUMERIK 840D sl Commissioning Manual

Machine and setting data

5.4 Machine data display filter

Axis selection
If several components are available for the area selected (e.g. "Axis SD "), you can choose
from the following options:
5.4 Machine data display filter
Through the use of the machine data display filter, it is possible to reduce the number of
displayed machine data relating to a certain area, e.g., general machine data or channel
machine data, for special purposes.
Machine data areas
Display filters are available for the following machine data areas:
● General machine data
● Channelspecific machine data
● Axis-specific machine data
● Drive machine data
Filter options
It is possible to limit the machine data display using the following filtering methods:
● Filter according to indices
● Filter according to display groups
● Display expert parameters
42
1. Press the "Axis +" or "Axis -" softkey.
...
The values of the next (+) and the previous (-) axes are displayed.
- OR -
Press the "Direct selection..." softkey.
The "Direct selection" window opens.
2. Select the required axis directly from those available in the drop-down
list box.
Commissioning Manual, 07/2007, 6FC5397-1DP10-2BA0
HMI sl (IM9)