Creating Screenshots - Siemens SINUMERIK 840D sl Commissioning Manual

13.4

Creating screenshots

You can create screenshots of the current user interface directly on the TCU.
Each screenshot is saved as a file and stored in a folder.
You can use the default storage path or specify a path yourself.
Proceed as follows
Ctrl + P
Specifying the storage location
The storage location is specified in the "systemconfiguration.ini" file. The default setting is:
[miscellaneous]
prt_screen_save_directory=/user/sinumerik/hmi/log/optimization/hmi
You can change this path name in the "systemconfiguration.ini" file found in the "OEM" or
"User" folder.
Opening a file
If you want to open the screenshots, proceed as follows:
HMI sl (IM9)
Commissioning Manual, 07/2007, 6FC5397-1DP10-2BA0
Press the <Ctrl+P> key combination.
A screenshot of the current user interface is created in .png format.
The file names assigned by the system run in ascending order from
"SCR_SAVE_0001.png" to "SCR_SAVE_9999". You can create up to 9,999
screenshots.
1. Press the "Program Manager" softkey.
2. Press the menu forward key and the "System data" softkey.
3. Open the following folder:
/HMI Data/Logs/Screenshots
4. You can copy the files to a Windows PC and open them there using,
e.g. the "Office Picture Manager" program.
- OR -
Copy the files using the WinSCP program. In the default setting, the
files are located under the following path:
/User/sinumerik/hmi/log/optimization/hmi
Service and diagnostics
13.4 Creating screenshots
125