Dvs-8000/8000C Digital Video Switcher And Dme-5000 Digital Multi Effects Connections - Sony DME-3000 Operation Manual

System Configuration
DVS-8000/8000C Digital Video Switcher and DME-5000 Digital Multi
Effects Connections
DME
BKDS-8010 Switcher Control Panel
: Loop-through connection
: 9-pin remote cable
: 75-ohm coaxial cable
V
: Video signals
K
: Key signals
a) Combining images from the DME-5000
and DME-3000/7000 requires the
optional BKDM-5020A or BKDM-
5021A board to be installed in the
DME-5000.
b) Up to four DME units can be controlled
from the BKDS-8010. Of these, up to
two can be DME-3000 units. Up to four
DME-7000 units can be controlled
simultaneously. However, certain
DME-3000/7000 functions are subject
to restrictions when controlled from the
BKDS-8010.
c) Component mode: Connect to VIDEO/
Y, KEY/Z and Z connectors using 3
cables.
Composite mode: Connect to VIDEO/
Y, EXT/C, KEY/Z and Z connectors
using 4 cables.
d) These connectors are provided only on
the DME-7000.
16(E)
b)
DIGITAL OUTPUTS
DIGITAL INPUTS
K
V
K V
AUX BUS OUTPUTS 1, 2
PRIMARY INPUTS
AUX BUS
OUTPUTS 3, 4
V
K
V
DIGITAL
OUTPUTS
DVS-8000/8000C and DME-5000 connections
DME-5000
Digital Multi Effects
COMBINER
a)
OUTPUTS
DME
AUX BUS
DVS-8000/
8000C Digital
Video Switcher
PRIMARY
INPUTS
COMBINER
DME-3000/7000 INPUTS
K
DIGITAL
INPUTS
CONTROL PANEL
SWITCHER
CONTORL
PANEL
c)
AUX
d) d)
SWITCHER PANEL