5. Connect the gas connections, see Gas connections (Page 46).
6. Check the gas paths for leaks, see Checking the sample gas path for leaks (Page 57).
7. Close the housing door using the six screws. Tightening torque: 2.0 Nm.
Wall-mounted device
Operating Instructions, 01/2013, A5E31930403-01
CAUTION
Cable damage
Make sure that the cables are carefully laid and secured again after you change an
analyzer module. Otherwise, the cables may be damaged as a result of friction or other
mechanical effects, see Cabling (Page 36).
Installing the analyzer modules and option module
5.2 Installation of the analyzer modules
33